$280.00
FREE delivery May 21 - June 6. Details
Or fastest delivery May 10 - 15. Details
In stock
Usually ships within 2 to 3 days.
$$280.00 () Includes selected options. Includes initial monthly payment and selected options. Details
Price
Subtotal
$$280.00
Subtotal
Initial payment breakdown
Shipping cost, delivery date, and order total (including tax) shown at checkout.
Ships from
MARVELOUS!
Ships from
MARVELOUS!
Sold by
MARVELOUS!
Sold by
MARVELOUS!
Returns
Eligible for Return, Refund or Replacement within 30 days of receipt
Eligible for Return, Refund or Replacement within 30 days of receipt
This item can be returned in its original condition for a full refund or replacement within 30 days of receipt. You may receive a partial or no refund on used, damaged or materially different returns.
Read full return policy
Returns
Eligible for Return, Refund or Replacement within 30 days of receipt
This item can be returned in its original condition for a full refund or replacement within 30 days of receipt. You may receive a partial or no refund on used, damaged or materially different returns.
Read full return policy
Payment
Secure transaction
Your transaction is secure
We work hard to protect your security and privacy. Our payment security system encrypts your information during transmission. We don’t share your credit card details with third-party sellers, and we don’t sell your information to others. Learn more
Payment
Secure transaction
We work hard to protect your security and privacy. Our payment security system encrypts your information during transmission. We don’t share your credit card details with third-party sellers, and we don’t sell your information to others. Learn more

K&M König & Meyer 23860.311.55 Microphone Desk Boom Arm Stand | Thread Connector | Wide Table Clamp Range For Smooth Surfaces/Tubes | Extra Long Mic Cable w/3 Pin XLR Plug Incl. | German Made Black

4.2 4.2 out of 5 stars 98 ratings
$280.00
Eligible for Return, Refund or Replacement within 30 days of receipt
This item can be returned in its original condition for a full refund or replacement within 30 days of receipt. You may receive a partial or no refund on used, damaged or materially different returns.
Read full return policy

{"desktop_buybox_group_1":[{"displayPrice":"$280.00","priceAmount":280.00,"currencySymbol":"$","integerValue":"280","decimalSeparator":".","fractionalValue":"00","symbolPosition":"left","hasSpace":false,"showFractionalPartIfEmpty":true,"offerListingId":"4wg15XqPcNBaubboSUfS7dgCi90zie65ocGgv50LIuxj%2BHdAcbNJDIUfe8S56bSsMuNHjYQ14eJby7DTZbwyRY2Ufuv84feoaJMCM3BU57HLx%2BkvE8l%2BYhxlMd2DYG7wion%2F2cQQD%2BPfkfzrd01%2F8wuTYrHaunl69jwRroEtOwr1%2FJ1yqs9a2uANqU6MYBGK","locale":"en-US","buyingOptionType":"NEW","aapiBuyingOptionIndex":0}]}

Purchase options and add-ons

Color Black
Brand K&M
Material Aluminim
Item Weight 1.3 Kilograms
Item dimensions L x W x H 22 x 5 x 6.5 inches

About this item

  • INNOVATIVE LEADER IN STAND TECHNOLOGY: This best-selling stand allows for maximum durability and stability so you can keep focused on your music. The K&M Microphone Desk Boom Arm stand is easy to assemble, adjust and is preferred among all musicians.
  • CALLING ALL MUSICIANS: Mount to table or shelf with up to a 2” width. Pivot and position the 37" extending boom arm. Use the ⅜ or 5⁄8 thread connector to firmly hold a 3.3lb mic or heavy condenser microphone. Perfect for Djs, audio recordings or podcasts.
  • TRUSTED DESIGN: A pre-routed 3 pin XLR 236” cable runs inside the tube eliminating clutter and having to tape or velcro loose messy dangling cables. A sturdy C-clamp makes set up and break-down a breeze and provides years of service at a great value!
  • SUPERIOR QUALITY: Reflecting our commitment to world-class construction, the Microphone Desk Boom Arm Stand is made in Germany. Designed with the highest standards, we offer a 5-year product warranty and 10-year on replacement parts availability.
  • ECO-FRIENDLY: For over 70 years, K&M is the desired brand for stands and holder accessories. Committed to environmental impact. Protection and responsible resource consumption, our eco-conscious company has an ISO- 14001 environmental certification.
Add a debit or credit card to save time when you check out
Convenient and secure with 2 clicks. Add your card

Frequently bought together

K&M König & Meyer 23860.311.55 Microphone Desk Boom Arm Stand | Thread Connector | Wide Table Clamp Range For Smooth Surfaces
$280.00
Get it May 21 - Jun 6
In stock
Usually ships within 2 to 3 days.
Ships from and sold by MARVELOUS!.
+
Shure SM7B Dynamic Vocal Microphone
$359.00
Get it as soon as Saturday, May 11
In Stock
Ships from and sold by Amazon.com.
Total price:
To see our price, add these items to your cart.
Details
Added to Cart
One of these items ships sooner than the other.
Show details Hide details
Choose items to buy together.

Product information

Warranty & Support

Product Warranty: For warranty information about this product, please click here

Feedback

K&M

K&M König & Meyer 23860.311.55 Microphone Desk Boom Arm Stand | Thread Connector | Wide Table Clamp Range For Smooth Surfaces/Tubes | Extra Long Mic Cable w/3 Pin XLR Plug Incl. | German Made Black

Found a lower price? Let us know. Although we can't match every price reported, we'll use your feedback to ensure that our prices remain competitive.

Where did you see a lower price?
/
/
/
/
Please sign in to provide feedback.

Product Description

This exclusive microphone arm with a 5/8" thread connector in a modern design with a new innovative table clamp for quick and easy positioning of a microphone in the studio or at a multimedia work station. The 6 m long internally guided microphone cable has a 3 pin XLR plug connector. Microphones to max. 3.2 pounds are easily held in any position. The clamping width of 0 to 2" allows the clamp to be attached to a wide variety of surfaces. The stable metal construction with high quality plastic inserts guarantees secure and strong hold. The cleverly shaped clamping parts allow the clamp to be used on smooth surfaces and round shaped tubes.

Compare with similar items

This Item
K&M König & Meyer 23860.311.55 Microphone Desk Boom Arm Stand | Thread Connector | Wide Table Clamp Range For Smooth Surfaces/Tubes | Extra Long Mic Cable w/3 Pin XLR Plug Incl. | German Made Black
K&M König & Meyer 23860.311.55 Microphone Desk Boom Arm Stand | Thread Connector | Wide Table Clamp Range For Smooth Surfaces/Tubes | Extra Long Mic Cable w/3 Pin XLR Plug Incl. | German Made Black
Recommendations
MAONO Microphone Arm, Mic Boom Arm with Cable Management Channels, Desk Clamp, Versatile Mounting, and Fully Adjustable, Heavy Duty Microphone Stand for Podcast (Low Profile (BA92 Black))
MAONO Microphone Arm, Mic Boom Arm with Cable Management Channels, Desk Clamp, Versatile Mounting, and Fully Adjustable, Heavy Duty Microphone Stand for Podcast (Low Profile (BA92 Black))
dummy
FIFINE Microphone Boom Arm, Low Profile Adjustable Stick Microphone Arm Stand with Desk Mount Clamp, Screw Adapter, Cable Management, for Podcast Streaming Gaming Studio-BM88
FIFINE Microphone Boom Arm, Low Profile Adjustable Stick Microphone Arm Stand with Desk Mount Clamp, Screw Adapter, Cable Management, for Podcast Streaming Gaming Studio-BM88
dummy
RØDE PSA1+ Professional Studio Arm with Spring Damping and Cable Management, Black
RØDE PSA1+ Professional Studio Arm with Spring Damping and Cable Management, Black
dummy
Elgato Wave Mic Arm - Premium Broadcasting Boom Arm with Cable Management Channels, Desk Clamp, 1/4" Thread Adapters, Fully Adjustable, perfect for Podcasts, Streaming, Gaming, Home Office, Recording
Elgato Wave Mic Arm - Premium Broadcasting Boom Arm with Cable Management Channels, Desk Clamp, 1/4" Thread Adapters, Fully Adjustable, perfect for Podcasts, Streaming, Gaming, Home Office, Recording
dummy
InnoGear Mic Boom Arm Microphone Stand Cable Management for Blue Yeti FIFINE AM8 K669B HyperX QuadCast S SoloCast AT2020 Shure SM7B MV7 and Other Microphone
InnoGear Mic Boom Arm Microphone Stand Cable Management for Blue Yeti FIFINE AM8 K669B HyperX QuadCast S SoloCast AT2020 Shure SM7B MV7 and Other Microphone
Details
Added to Cart
Details
Added to Cart
Details
Added to Cart
Details
Added to Cart
Details
Added to Cart
Details
Added to Cart
Price$280.00-22% $69.99
List: $89.99		-29% $42.39
List: $59.99		$129.00-20% $79.99
List: $99.99		$47.99
Delivery
Get it May 21 - Jun 6
Get it as soon as Saturday, May 11
Get it as soon as Saturday, May 11
Get it as soon as Saturday, May 11
Get it as soon as Saturday, May 11
Get it as soon as Saturday, May 11
Customer Ratings
4.24.2 out of 5 stars98
4.64.6 out of 5 stars49
4.54.5 out of 5 stars1,815
4.84.8 out of 5 stars1,104
4.74.7 out of 5 stars1,958
4.54.5 out of 5 stars466
Sturdiness
4.6
4.0
4.0
4.7
4.7
4.3
Value for money
4.0
4.3
4.5
4.5
4.6
3.8
Range of motion
4.0
3.8
4.2
4.7
4.7
4.1
Quality of material
—
3.0
4.4
4.7
4.7
4.5
Stability
—
—
3.9
4.8
4.9
—
Sold By
MARVELOUS!
Nature shopping
Fifine shop
Amazon.com
Amazon.com
InnoGear
material
Aluminim
Aluminum
Metal
Neoprene
—
Alloy Steel
size
—
Low Profile (BA92 Black)
Low Profile (BM88 Black)
—
High Rise
—
weight
1.3 kilograms
4.4 pounds
1300 grams
3.4 pounds
4.92 pounds
1.6 kilograms

Looking for specific info?

Customer reviews

4.2 out of 5 stars
4.2 out of 5
98 global ratings

Customers say

Customers like the sturdiness and stability of the microphone stand. They mention that it holds up heavy condenser microphones just fine, and that the mount seems to be sturdy. That said, opinions are mixed on value and performance.

AI-generated from the text of customer reviews

9 customers mention9 positive0 negative

Customers are satisfied with the sturdiness of the microphone stand. They mention that it is very solid, the mount seems to be sturdy, and the tensile strength of the springs holds the arm in place just fine. They also appreciate the high quality 20 foot Neutronix cable that is included. Overall, customers are happy with the quality and performance of this stand.

"...upon this listing, and have been extremely pleased - the boom hasn't sagged a centimeter, and is extremely fluid when repositioning...." Read more

"...The tensile strength of the springs holds the arm in place just fine, the materials are durable to fit all but the roughest of users, and it holds..." Read more

"...I was surprised when I discovered a high quality 20 foot Neutronix cable is included, already pre-routed through the tubing...." Read more

"...This is constructed of aluminum, and the arm is solid. The mounting system is much stronger that the others I have used...." Read more

3 customers mention3 positive0 negative

Customers are satisfied with the stability of the microphone stand. They mention that it clamps solidly to their shelf and pivots to any position with ease. They are also happy with the stand, saying that it mounts sturdy enough for their purposes.

"...Super happy with the stand. Stays put, easy to move if you want to sit or stand while recording, or just move it out of the way...." Read more

"...It went together with no instructions. It clamped solidly to my shelf and pivots to any position with ease...." Read more

"...Smooth action. Holds up my AKG 420 just fine (1.2 lbs). Mounts strurdy enough for my purposes. Fits on my half desk takes up the whole depth...." Read more

9 customers mention5 positive4 negative

Customers are mixed about the value of the microphone stand. Some mention it's worth the price and a very good buy, while others say it'll break easily.

"...It's safe to say that this arm is more than suitable, less expensive substitute with better mounting options to boot...." Read more

"...Very expensive for what it is, but I prefer to buy once cry once know what I mean?" Read more

"...Worth the money, very close to studio quality." Read more

"...This item is expensive and I would love to set it up and THEN review it but instead I'm just sitting here, annoyed that all of the parts didn't show..." Read more

5 customers mention3 positive2 negative

Customers are mixed about the performance of the microphone stand. Some mention that it works great and causes no headaches, while others say that it's completely useless and didn't work well for them.

"...The integrated cable works just fine, albeit non-removable and permanent. I'd pick nits just to keep things real, but it's tough to think of any...." Read more

"...Because it's built in, it's completely useless. Hopefull I can get it replaced with a 2nd unit that was assembled correctly...." Read more

"This desk arm is the perfect solution for my voice-over studio...." Read more

"So this product has potential to be amazing but did not work well for me." Read more

Sure
4 Stars
Sure
Lots of cable. Smooth action. Holds up my AKG 420 just fine (1.2 lbs). Mounts strurdy enough for my purposes. Fits on my half desk takes up the whole depth. It's record player next to it in the picture. Cheers.
Hide
Thank you for your feedback
Sorry, there was an error
Sorry we couldn't load the review

Top reviews from the United States

Logan Griswold
5.0 out of 5 stars Great boom!
Reviewed in the United States on May 12, 2020
Material Type: AluminimVerified Purchase
I was looking to upgrade from a much flimsier, much weaker spring mic boom. The old stand I had was... perfunctory... for a light microphone, but didn't really stand a chance when it came to anything over a few pounds. I happened upon this listing, and have been extremely pleased - the boom hasn't sagged a centimeter, and is extremely fluid when repositioning. I'm using it with a Rode NT2-A with shock mount and pop filter, and it could probably still handle a good bit more.

I will say that I have no idea how the mount performs for this product. My desk doesn't accommodate the mounting bracket, so I instead drilled a flush mount into the desk which works great. The mount seems to be sturdy - but I can't say for certain. The boom itself the real star.
One person found this helpful
Helpful
 Report
Greg Uy
5.0 out of 5 stars Hidden gem of a desk arm!
Reviewed in the United States on November 19, 2015
Material Type: Alloy SteelVerified Purchase
Before I had run into this desk arm on Amazon, I was in the market for studio grade arms like the M!ka OnAir and O.C. White's ProBoom Elite.

It's safe to say that this arm is more than suitable, less expensive substitute with better mounting options to boot. The tensile strength of the springs holds the arm in place just fine, the materials are durable to fit all but the roughest of users, and it holds up heavy condenser microphones just fine (I have an Audio Technica AT2035 attachted to it with zero issues - while it's not particularly heavy, it holds up just fine).

The integrated cable works just fine, albeit non-removable and permanent. I'd pick nits just to keep things real, but it's tough to think of any. This would be a definite no-brainer buy if it included a riser!
2 people found this helpful
Helpful
 Report
MoxyDave
5.0 out of 5 stars Great stand, super expensive
Reviewed in the United States on December 27, 2019
Material Type: AluminimVerified Purchase
I use this to record voiceovers for video games with a Shure SM7B mic. Super happy with the stand. Stays put, easy to move if you want to sit or stand while recording, or just move it out of the way. Very expensive for what it is, but I prefer to buy once cry once know what I mean?
8 people found this helpful
Helpful
 Report
R.L. Dioxin
4.0 out of 5 stars You can't go wrong with K&M; plus you can get replacement parts
Reviewed in the United States on December 27, 2013
Verified Purchase
I saw the other desk arms here for $50-to-100 less but try to get replacement parts for these little-known brands years from now. I own many K&M products so I just pulled the trigger and went with known quality. I was surprised when I discovered a high quality 20 foot Neutronix cable is included, already pre-routed through the tubing.

It went together with no instructions. It clamped solidly to my shelf and pivots to any position with ease. It came only with an exploded parts diagram with part numbers in case of future need.

One minor quibble: included was a small plastic bag with a small washer/spacer with neither part number nor explanation of what it's for. I looked on the diagram to try to identify it but didn't find it immediately so I just marked it with a sharpie in case I ever need it and put it in my microphone case.
8 people found this helpful
Helpful
 Report
Miles Austin
5.0 out of 5 stars Finally, a Mic arm that can take the day to day use of being swivelled, moved and adjusted without any hassle - Commercial grade
Reviewed in the United States on March 1, 2017
Material Type: AluminimVerified Purchase
I had been looking for a commercial "pro-grade" arm for over a year. Have been through several less expensive, lower-quaity arms from Heil and other brands. While those worked well for infrequent use, when I started recording every day, the Heil and others just wore out, twisted and the springs lost their resistance.

This is constructed of aluminum, and the arm is solid. The mounting system is much stronger that the others I have used. Be aware that this comes with an internal XLR-type connector and cable , so if you are using a USB microphone, you will need to purchase a USB cable of the appropriate length. I use this with a Shure SM7B and this K&M arm holds it up without any stress and swinging or pivoting it out of the way puts no stress on the components. It also comes with an adapter so that you should be able to connect your microphone to the arm no matter what size connector you require. Very happy with the purchase
13 people found this helpful
Helpful
 Report
Tora
1.0 out of 5 stars it's completely useless. Hopefull I can get it replaced with a ...
Reviewed in the United States on April 2, 2016
Material Type: Alloy SteelVerified Purchase
My arm arrived with the XLR cable backwards. Because it's built in, it's completely useless. Hopefull I can get it replaced with a 2nd unit that was assembled correctly. Def a bummer for the price.
4 people found this helpful
Helpful
 Report
dookel
3.0 out of 5 stars XLR cable quality is sub-par
Reviewed in the United States on February 25, 2019
Material Type: Alloy SteelVerified Purchase
Title says it all. The built-in XLR cable is very noisy, and it appears to be non user replaceable.
I bought this for my RE27N/D, which is already a heavy microphone, but paired with the EV 309a shock mount, this arm really struggled to support the weight. It says 1.7 pounds max load, but I would play it safe and say less than this if you want consistency.
The rest of the equipment is quality. Springs aren't noisy, desk clamp is sturdy and easy to adjust, and I actually like that the cable is integrated for the sake of neatness; it's just too bad I wouldn't spend any amount of money on this cable alone.
One person found this helpful
Helpful
 Report
Karen L. Watkins
5.0 out of 5 stars A very good buy.
Reviewed in the United States on January 23, 2020
Material Type: Alloy SteelVerified Purchase
This was on the Christmas/birthday list of my son, a professional DJ. He was quite pleased with the product.
Helpful
 Report

Top reviews from other countries

Translate all reviews to English
Sebastian B.
5.0 out of 5 stars Qualität kostet halt
Reviewed in Germany on July 28, 2022
Material Type: AluminimVerified Purchase
Nicht immer ist teuer gleich besser, in diesem Fall aber schon. Gernevt vom knarzenden Rode-Mikorofonarm, war ich auf die Suche nach einer Alternative und bin schnell auf den König und Meyer gestoßen.

Dieser Mikrofon-Arm ist teurer aber qualitativ wirklich hochwertig. An dem Arm hängt mein Shure SM7B und es hält perfekt. Kein nerviges knarzes mehr von Federn wie beim Rode. Stufenloses verstellen möglich, nahezug geräuscharm und leichtgängig. Was will man mehr - außer vielleicht eine Preisreduzierung.

Wenn man nun doch etwas finden möchte, wäre das vielleicht das etwas zu lange, fest verbaute XLR-Kabel. Beim Shure SM7B brauch ich nicht so viel Kabel, sodass ich jetzt das restliche Kabel ein paar Mal um den Arm wickeln musste. Aber das ist dann auch jammern auf hohem Niveau.
Report
Kerpel,Balázs
5.0 out of 5 stars ein alt klassische Hersteller Haut hin...
Reviewed in Germany on April 17, 2022
Material Type: Alloy SteelVerified Purchase
Mikrofon-schwenkarm (K&M 23850) Variante B von König und Meyer mit ein innengeführtem König und Meyer xlr Mikrofonkabel hält den Mikrofon in allen Einstellungen rechts stabil.
Es wackelt nicht, keine unnötigen verstellungen. Die tischklemme ist von Sehen und Gefühl fachgerecht, man fühlt sich befridigend weist keinen mangeln auf es wirkt als es zu meinem Tisch Technisiert (engineered) wurde.
Der Preis ist in verhalten zu anderen Herstellern recht günstiger.
Von meinem Sicht es gibt nichts zu jammern bzw. meckern. Kauft euch das Stück und erlebt es.
Oder es gibt zwei weiteren Ausführungen in Angebot:
Ausführung A K&M-23860, 149EUR
Ausführung C K&M-23840, 58EUR
Report
gadget enthusiast
5.0 out of 5 stars Build quality on this product is top-notch: justifies the high price.
Reviewed in Canada on May 28, 2020
Material Type: Alloy SteelVerified Purchase
After some research and online comparisons (with in-store investigation not an option due the COVID-19 pandemic), I narrowed my choices to the K&M 23850 Microphone Desk Arm and the RODE PSA-1.

The latter was cheaper, but also a less elegant solution. The K&M comes with what seems to be a sturdy/high quality 5m long microphone cable with a 3 pin XLR plug connector. The cable runs through the metal arms of the K&M! This decreases the clutter, and need for additional, tape, velcro or other non-elegant cable-management solutions.

Steel construction and the 0.8kg max-load capacity are reassuring. I have attached to the K & M a not so light, large diaphram condenser mic (0.35kg), and clearly, this arm is built hold much heavier and bigger mics.

Negative? Cannot be conveniently used with mics with proprietary cables (such as the Audio Technica AE2500 dual mic which houses a dynamic AND a condenser mic phase aligned). For pro-audio, this should be a non-issue 99% of the time.
Report
Richard G. Elen
5.0 out of 5 stars Sturdy and professional
Reviewed in the United Kingdom on August 6, 2019
Material Type: Alloy SteelVerified Purchase
There are much cheaper "anglepoise" style microphone desk stands, but these are the best: solid, sturdy and able to safely hold even quite heavy microphones without drooping.

Note that this exact model has now been superseded, but the new model is equally good. K+M is an excellent manufacturer and their products can always be relied upon.
Report
のむのむ
4.0 out of 5 stars 高いけど
Reviewed in Japan on June 2, 2020
Material Type: AluminimVerified Purchase
シンプルで使いやすいしデザインも良いし、品質も良い
One person found this helpful
 Report